Siemens HiPath 2000 Administration Manual page 93

VLAN Method
• Can only be defined if
• You can specify here from where the
fetched when using
Manual
DHCP
Page 23
WAP Connection Type
• Only configurable on optiPoint 410/420 standard/advance and only
required if a display module or application module is used.
• Choose the protocol to be used for transferring data for WAP
applications (
Page 56
WAP Favourites
• Only configurable on optiPoint 410/420 standard/advance and only
required if a display module or application module is used.
• Select your WAP favourites from the list box. If no entries are
available, the list entry <empty> is displayed. For entering favourites,
see WAP Title.
Page 57
WAP Password
• Only configurable on optiPoint 410/420 standard/advance and only
required if a display module or application module is used.
• Enter a password for WAP gateway access.
Page 56
WAP User Name
• Only configurable on optiPoint 410/420 standard/advance and only
required if a display module or application module is used.
• Enter the user name for WAP gateway access.
Page 56
WAP Gateway Address
• Only configurable on optiPoint 410/420 standard/advance and only
required if a display module or application module is used.
• If a WAP server is being used, enter the
here.
• Default address
Page 56
Layer 2 support is activated (
VLANs.
The ID entered under
When using a DHCP server, the ID supplied by
this server is used.
Page 18 Page 62
HTTP or WSP).
Page 109.
Alphabetical Reference
QoS L2/L3).
Default VLAN ID is to be
Default VLAN ID is used.
IP Address of this server
93