Siemens HiPath 2000 Administration Manual page 90

Alphabetical Reference
SRSR Switch To Standby Retry Count
•
•
•
•
SRSR TC_TEST Expiry Timeout
•
•
•
SRSR TC_TEST Retry Count
•
•
•
•
Submit Changes
•
•
Subscriber Number
•
•
•
Subscriber Password
•
•
•
•
90
Maximum number of negative attempts for switching over to standby
mode.
If all attempts fail, a further attempt is made to switch to home mode
(standard mode).
Valid values: 1 ... 255.
Default value Page 109.
Page 67
Only required if SRSR Automatic Switch Back is activated.
Communication platform is in standby mode (emergency mode).
Time period after which the next attempt to set up a connection to the
Main PBX (standard telephone system) will be started.
Page 67
Only required if SRSR Automatic Switch Back is activated.
Communication platform is in standby mode (emergency mode).
Maximum number of positive attempts for switching over from
standby mode (emergency mode) to home mode (standard mode).
Default value Page 109.
Page 67
Only on optiPoint 410/420 standard/advance in conjunction with a
display module or application module.
Confirm the changes you have made to the parameters of the selected
program.
Page 57
Enter the subscriber number for the optiPoint 410/420 here.
The number can be 1 to 24 characters long.
This number is used as the internal telephone number.
Page 27 Page 65
This password allows you to transfer the subscriber number and the
configuration settings of your telephone to another telephone (mobile
logon).
Valid values: Alphanumeric
Minimum length: 6 (for more information, see
Maximum length: 20
Page 27 Page 65
Password Functions)