Siemens HiPath 2000 Administration Manual page 74

Alphabetical Reference
DHCP
•
•
•
•
Display Name/Program Display Name
•
•
•
•
Display Test
•
•
DLS Server Port
•
DLS Server Address
•
DNS Addresses
•
•
•
Domain Name
•
•
74
Activate this option if the required IP data of the telephone should be
assigned dynamically by a
If no DHCP server is available in the IP network, please deactivate this
option. In this case, the data corresponding to
Terminal Mask and
A restart is necessary after the change.
Default value Page 109.
Page 22 Page 18
Only on optiPoint 410/420 standard/advance in conjunction with a
display module or application module.
The name of the program as it appears in the program menu of the
application module or display module. The display name must be
unique on the telephone and the field must not be blank.
Valid values: Alphanumeric, though no '^' characters
Maximum length: 100 characters
Page 57
Conduct this test to check the function of the
Display telephone.
Different display contents are displayed with the
Page 32
Enter the Port number here for communication with the
server.
Page 66
Enter the IP Address of the
Page 28 Page 65
Enter the IP Address of the
server assigns this value dynamically and the optiPoint 410/420 is not
operated on a PBX via
Default address
IP editor on optiPoint 410/420
Page 62
Enter the name of the associated domain only if the optiPoint 410/420
is not operated in a
Default name Page 109.
Page 62
DHCP server.
Default Route must be defined manually.
Page 62
DLS server.
DNS server here only if no
HFA.
Page 109.
Page 106.
PBX via HFA.
Terminal IP Address,
LCD display on the
< >
and keys.
DLS
DHCP