Siemens HiPath 2000 Administration Manual page 91

System Type
• Select the type of communication platform used here (read only).
• Base
• Standby
Page 26
Terminal IP Address
• Enter the IP Address for the optiPoint 410/420 here, provided that
no DHCP server assigns this value dynamically (
• If the value was assigned dynamically, it can only be read.
• A restart is necessary after the change.
• Default value
• IP editor on optiPoint 410/420
Page 22
Terminal Mask
• Enter the Subnet Mask for the optiPoint 410/420 here, provided that
no DHCP server assigns this value dynamically (
• If the value was assigned dynamically, it can only be read.
• A restart is necessary after the change.
• Default value
Page 22
Time Source
• In this field, you specify how time is updated on your telephone.
System All settings are transferred from the system (
SNTP Enter the following parameters manually:
Default SNTP IP,
Page 67
Time Window
• Messages sent by the gateway will be accepted only within this
defined time window.
• Operation, max.: 180 minutes
Page 65
Timezone offset
• This entry is only required if you selected "SNTP" in the
field.
• Enter the time difference (in seconds) between your time zone and
Greenwich Mean Time (GMT). Example for Germany: + 3600.
Page 67
Page 65 Page 65
Page 109.
Page 106.
Page 18 Page 62
Page 109.
Page 18 Page 62
Timezone offset,
Alphabetical Reference
DHCP).
DHCP).
DHCP).
Daylight Saving
Time Source
91