Toshiba Strata CTX Programming Manual page 96

Station
Assignment
F
IELD
24 TGAC Override
25 Service Tones
26 CW and ROB Tone
27 Name Display
28 Door Ovr DND
30 Chg Sys Speed
31 Network COS
32 Auto OCA
33 Originate OCA
34 RSTU Supervision
35 Station SpDial Bins
5-4
D
ESCRIPTION
1
Enable Trunk Group Access Code (TGAC) override (for Attendant console) from
this station.
Possible values: Enable or Disable (default)
Disable Service Tone for Data Privacy.
Possible values: Enable (default) or Disable
Note Service tone such as Call Waiting should be disabled for modems, faxes,
and similar devices.
Enable/Disable the station to receive Call Waiting (Campon) and Ring Over Busy
Tone.
Possible values: Enable (default) or Disable
Notes
• CW tone is always two beeps.
• ROB tone can be two beeps or continuous as set in PRG 204, 27.
Enable this station with the privilege to put the user name in the Directory
Assistance display of a large LCD.
Possible values: Enable (default) or Disable
Enable DND override by door phone.
Possible values: Override or Do not Override (default)
Enable this station to use System Speed Dial.
Possible values: Enable or Disable (default)
Select Network COS value.
Possible values: 1~32 (default = 1)
OCA occurs automatically when making a call to a busy station that allows OCA
calls to be received.
Possible values: Enable or Disable (default = Enable)
Enable this station with the privilege to make OCA calls to other stations.
Possible values: Enable (default) or Disable
This enables the auto disconnect Tandem timer in Program 104, FB06 for these
types of Connections.
Possible values: Received (default) or Not Received
Possible values: Devices connected to RSTU circuits that do not automatically
hang up, and connect to CO lines that do not provide disconnect
supervision, should be set with "Not Received."
The number of station speed dial bins allocated to this station:
Possible values: 0~100 (default = 0)
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03