Dr Override By System Speed Dial - Toshiba Strata CTX Programming Manual

509 DR Override by System Speed Dial

Prerequisite Program:
This command assigns the COS, DRL, FRL and QPL values used by DR Override by Speed Dial.
1. From the Program Menu, click
Services > LCR/DR > DR Override
by System Speed Dial.
2. Select the COS, DRL, FRL and
QPL override values.
3. Click Submit.
F
IELD
01 Override COS
02 Override DRL
03 Override FRL
04 Override QPL
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
None
D
ESCRIPTION
Select the override COS value.
Possible values: 1~32 (default =1)
Select the override DRL value.
Possible values: 1~16 (default =1)
Select the override FRL value.
Possible values: 1~16 (default =1)
Select the override QPL value.
Possible values: 1~16 (default =1)
Least Cost Routing/Destination Restriction
Services
9-25