Toshiba Strata CTX Programming Manual page 423

Digital business telephone systems
Hide thumbs Also See for Strata CTX:
Table of Contents

Advertisement

Program
Code
48
49
49
49
51
309
51
80
82
96
98
33
310
48
80
311
49
49
49
312
80
82
33
33
313
49
80
315
33
49
Strata CTX Programming - Part 4: Appendices 04/03
Occurred
Sub-
FB
parameter
No incoming destination number is entered for the parameter
A7$×
required.
A7 
The entered DID conflicts with an existing wild card PCB. The
allowable number of DID assignments including a wild card
A7
PCB is exceeded.
The selected GCO conflicts with an existing ILG number.
A7"
The selected Pool Line Group conflicts with an existing ILG
A7#
number.
The entered ILG number does not exist in the system.
A7
The length of entered DID value exceeds the allowable
A7
contract digit number.
The entered GCO key group does not exist in the system.
A7"
The selected ILG number does not exist in the system. The
A7
number of ILGs exceed the system capacity.
The number of allowable GCO or POOL key group
A7"
assignments has been exceeded.
A7#
The allowable number of DID assignments has been
A7
exceeded.
The entered equipment value is invalid.
A7
No incoming destination number is assigned for the required
A7 ×
parameter.
A7"
The entered circuit is not set to support the designated trunk.
A7
Although DISA security is set to Necessary, no DISA code
A7
has been assigned.
The entered DID number is not assigned to an ILG.
A7
The DID Number entered is invalid.
DID Number entered does not exist in the system.
The entered ILG number does not exist in the system.
A7
The entered equipment value is invalid.
A7
The entered equipment value is invalid.
A7
When Signalling Method field is set to CLASS:
A7!
A7"
The entered trunk number does not exist in the system.
A7
"NONE" entered in any field is invalid.
A7
A7!
A7#
A7$
The entered equipment value is invalid.
A7"
The PCB installed in the designated Shelf/Slot must be a
A7
RDTU.
Error Descriptions
The Signalling Contents field value must be assigned
The CLID Equipment Number Position circuit for the CIU
must be entered.
System Error Codes
Trunk Programming Error Codes
B-13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Strata ctx100Strata ctx670

Table of Contents