Toshiba Strata CTX Programming Manual page 428

System Error Codes
Service Programming Error Codes
Program Code
33
33
33
33
49
507
49
49
52
80
80
82
96
33
49
49
508
49
52
96
509 -
510 49
512 -
513 80
514 80
515 -
B-18
Sub-
Occurred FB
parameter
A7
A7%—A7'
A7%—A7'
A7#
A7
A7
A7
A7
A7
A7
A7
A7
A7"
A7!
A7"
A7"
A7"
A7

A7

A7
A7

Error Descriptions
The DDCB Equipment number entered is invalid.
The destination number value is out of range (when
destination type is Paging Group).
The allowable number of Paging Groups have been
exceeded.
The entered Ring Duration is invalid.
Door Phone number entered conflicts with an existing Door
Phone number.
The equipment assigned in DDCB Equipment Number is
already in use.
The entered value conflicts with an existing DKT extension.
The entered Circuit conflicts with an existing door lock.
The entered Door Phone number does not exist in the system.
The PCB Type designated for this circuit must be a DKU.
The entered Door Phone number does not exist in the system.
The allowable number of Door Phones has been exceeded.
The entered equipment value is invalid.
The designated BIOU PCB circuit is used by another device
(Night Bell, etc.), or two or more door locks are designated for
the same BIOU PCB.
The PCB Type designated for this DDCB circuit must be a
PDKU or BDKU.
The DDCB Equipment number entered conflicts with an
existing door lock.
Other devices (DKT extensions, door phones, etc.) are
designated for the specified DDCB circuit.
The allowable number of Door Locks has been exceeded.
No error occurs for this command except for common errors.
The specified COS Override Code digit is invalid.
No error occurs for this Program except for common errors.
ILG number enter does not exist.
The entered OLG number does not exist.
No error occurs for this Program except for common errors.
Strata CTX Programming - Part 4: Appendices 04/03