Programs 650~660
(continued)
Button
Sequence
657
Network COS
Mapping Table
Assignment
,
%$&
Cyq
Network COS
n,
Cyq
657-01
Local COS
, n,
A7
Cyq
657-02
Off-hook Call
Announce
, n,
A7!
Cyq
657-03
System Speed Dial
, n,
A7"
Cyq
657-04
COS Override
, n,
A7#
Cyq
657-05
TGAC Override
, n,
,
A7$
Cyq
Cyq
658/
Network DRL
Mapping Tables
659/
660
,
%$'%$(%%
Cyq
Type
n,
Cyq
Network DRL/FRL/
QPL
, n,
A7
Cyq
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Value(s)
n =
1~32
n =
1~32
n =
1. Enable
2. Disable (default)
n =
1. Outbound
2. Inbound
n =
1~16
Telephone Button Programming
Summary
This table translates a Network COS received as part of a Traveling
Class Mark to a local Class of Service for access to local services.
There is no translation of Outgoing Network COS.
Enter the Network COS to be translated (1~32).
Enter the Local COS to be used in place of the received Network
COS (1~32).
Choose whether an incoming call with this Network COS can activate
Off-Hook Call Announce.
Choose whether an incoming call with this Network COS can use a
System Speed Dial number to make an otherwise restricted outgoing
call.
Choose whether an incoming call with this Network COS can use
Class of Service Override.
Choose whether an incoming call with this Network COS can override
local Trunk Group Access Control. Typically an attendant function.
This command is used to establish two mapping tables to equate
local DRLs with network DRLs for both outbound and inbound
network calls.
Choose "Outbound" to equate the DRL of the local originator to a
Network DRL. Choose "Inbound" to equate a received Network DRL
with a local DRL for local termination.
Enter the local DRL/FRL/QPL you want to map to Network DRL/FRL/
QPL 1~DRL/FRL/QPL 16. This value can be different depending on
the type of table chosen above.
600 Series Programs
13-91