D-Link DWC-1000 User Manual page 73

Wireless Controller
Profile: The Access Point profile name you added. Use 0 to 32
characters.
Profile Status: can have one of the following values:

Associate a profile with an AP. Entry of the AP is valid and available in
database of the controller.
The following actions are supported from this page :
Edit: To edit the existing AP profile.
Delete: To delete the existing AP profile.
Add: Add a new AP profile
Copy: Copy the existing AP profile.
Apply: Update the AP profile configuration details entered .
Configure Radio: Allows configuration of the AP profile Radio configuration.
Configure SSID: Allows configuration of the AP profile VAP configuration.
Configure QoS: Allows configuration of the AP profile QoS configuration.
•
Associated: The profile is configured, and one or more APs
managed by the controller are associated with this profile.
•
Associated-Modified: The profile has been modified since it
was applied to one or more associated APs; the profile must be re -
applied for the changes to take effect.
•
Apply Requested: After you select a profile and click Apply,
the screen refreshes and shows that an apply has been requested.
•
Apply In Progress: The profile is being applied to all APs that
use this profile. During this process the APs reset, and all wireless
clients are disassociated from the AP.
•
Configured: The profile is configured, but no APs managed by
the controller currently use this profile.
72
User Manual