D-Link DWC-1000 User Manual page 162

Wireless Controller



A table displays to indicate proposed channel assignments. Each entry shows the
AP along with the current and new channel. To accept the proposed channel
change, click Apply. You must manually apply the channel plan for the proposed
assignments to be applied.


Proposed Channel Assignments: If no APs appear in the table after the algorithm
is complete, the algorithm does not recommend any channel changes.


The following actions are supported from this page:
Start: To initiate the channel plan algorithm
None: The channel plan algorithm has not been manually run since the
last controller reboot.
Algorithm in Progress: The channel plan algorithm is running.
Algorithm Complete: The channel plan algorithm has finished running.
Apply In Progress: The controller is applying the proposed channel plan
and adjusting the channel on the APs listed in the table.
Apply Complete: The algorithm and channel adjustment are complete
Current Channel: Shows the current operating channel for the AP that
the algorithm recommends for new channel assignments.
New Channel: Shows the proposed operating channel for the AP.
161
User Manual