Igmp Setup; Figure 114: Isatap Tunnel Configuration - D-Link DWC-1000 User Manual

Wireless Controller
ISATAP Subnet Prefix: This is the 64-bit subnet prefix that is assigned to the logical
ISATAP subnet for this intranet. This can be obtained from your ISP or internet registry,
or derived from RFC 4193.

Figure 114: ISATAP Tunnel Configuration

End Point Address: This is the endpoint address for the tunnel that starts with this
router. The endpoint can be the LAN interface (assuming the LAN is an IPv4 network),
or a specific LAN IPv4 address.
IPv4 Address: The end point address if not the entire LAN.
6.9

IGMP Setup


The following feature is available upon licensed activation of VPN / Firewall
features for the system.
203
User Manual