Yamaha MT-01 T 2005 Service Manual page 39

Rear suspension
Type
Spring/shock absorber type
Rear shock absorber assembly travel
Spring free length
Limit
Installed length
Spring rate K1
Spring stroke K1
Optional spring available
Enclosed gas/air pressure (STD)
Spring preload adjusting positions
Minimum
Standard
Maximum
Rebound damping adjusting positions
*With the adjusting knob fully turned in
Minimum
Standard
Maximum
Compression damping adjusting positions
*With the adjusting screw fully turned in
Minimum
Standard
Maximum
Swingarm
Swingarm end free play limit (radial)
Swingarm end free play limit (axial)
Drive chain
Type/manufacturer
Link quantity
Drive chain slack
15-link length limit
CHASSIS SPECIFICATIONS
Swingarm (link suspension)
Coil spring/gas-oil damper
50.0 mm (1.97 in)
159.5 mm (6.28 in)
156.0 mm (6.14 in)
150.0 mm (5.91 in)
186.30 N/mm (1063.77 lb/in) (19.00 kgf/mm)
0.0–50.0 mm (0.00–1.97 in)
No
1200 kPa (170.7 psi) (12.0 kgf/cm²)
Installed spring length
155.0 mm (6.10 in)
150.0 mm (5.91 in)
145.0 mm (5.71 in)
20 click(s) out*
12 click(s) out*
3 click(s) out*
12 click(s) out*
10 click(s) out*
1 click(s) out*
1.0 mm (0.04 in)
1.0 mm (0.04 in)
50VM3/DAIDO
114
40.0–50.0 mm (1.57–1.97 in)
239.3 mm (9.42 in)
2-13