Yamaha MT-01 T 2005 Service Manual page 114

Spring preload adjusting
positions
Installed spring length
Minimum
155.0 mm (6.10 in)
Standard
150.0 mm (5.91 in)
Maximum
145.0 mm (5.71 in)
c. Installed spring length
c. Tighten the locknut to specification.
Locknut (rear shock absorber
spring preload adjusting nut)
42 Nm (4.2 m·kg, 30 ft·lb)
ECA13600
CAUTION:
Always tighten the locknut against the ad-
justing nut and torque it to specification.
L LLL L LLL L L LLL L
Rebound damping
ECA13590
CAUTION:
Never go beyond the maximum or minimum
adjustment positions.
1. Adjust:
• Rebound damping
a
3
2
b
1
c
L LLL L L LLL L L LLL L
M MMM M MMM M
a. Turn the adjusting knob "1" in direction "a" or
"b".
Direction "a" (turn in)
Rebound damping is increased
(suspension is harder).
Direction "b" (turn out)
Rebound damping is decreased
(suspension is softer).
Rebound damping adjusting
positions
* With the adjusting knob fully turned in
L LLL L LLL L
Compression damping
ECA13590
CAUTION:
Never go beyond the maximum or minimum
adjustment positions.
1. Adjust:
• Compression damping
M MMM M MMM M
a. Turn the adjusting screw "1" in direction "a" or
"b".
LLL
Direction "a" (turn in)
Compression damping is increased
(suspension is harder).
Direction "b" (turn out)
Compression damping is decreased
(suspension is softer).
3-29
M MMM M M MMM M M MMM M
Minimum
20 click(s) out*
Standard
12 click(s) out*
Maximum
3 click(s) out*
1
L LLL L L LLL L L LLL L
M MMM M M MMM M M MMM M
CHASSIS
M MMM M MMM
a
b
L LLL L LLL
M MMM M MMM