Operating The Radio On The Tv - Yamaha Aventage RX-A3040 Owner's Manual

• "Program Service", "Program Type", "Radio Text", and "Clock Time" are not
displayed if the radio station does not provide the Radio Data System
service.
■
Receiving traffic information
automatically
TUNER
When "TUNER" is selected as the input source, the unit
automatically receives traffic information. To enable this function,
follow the procedure below to set the traffic information station.
1
When "TUNER" is selected as the input source,
press OPTION.
2
Use the cursor keys to select "Traffic Program"
OPTION
(TrafficProgram) and press ENTER.
Cursor keys
ENTER The traffic information station search will start in 5 seconds.
RETURN
Press ENTER again to start the search immediately.
• To search upward/downward from the current frequency, press the cursor
keys (q/w) while "READY" is displayed.
• To cancel the search, press RETURN.
• Texts in parentheses denote indicators on the front display.
The following screen appears for about 3 seconds when the
search finishes.
Finished TrafficProgram
DOCK
TAG
HD
PRE AMP PARTY
ZONE ZONE ZONE
2 3 4 TP FM101.30MHz
IN OUT 1 OUT 2
STEREO TUNED SLEEP
HD 3
Traffic information station (frequency)
• "TP Not Found" appears for about 3 seconds when no traffic information
stations are found.

Operating the radio on the TV

You can view the radio information or select a radio station on the
TV.
• (U.S.A. model only)
See "HD Radio™ operation on the TV" (p.79) to operate the radio on the TV.
1
Press TUNER to select "TUNER" as the input
source.
The playback screen is displayed on the TV.
■
Playback screen
1
2
1
Radio station information
Displays the information of the selected radio station such as the selected
band (FM/AM) and frequency.
(U.K. and Europe models only)
When tuning into a Radio Data System broadcasting station (p.80), the
MUTE VOLUME
ADAPTIVE DRC
Radio Data System information ("Program Service", "Program Type,"
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
"Radio Text" and "Clock Time") is also displayed.
2
Band icon
(Except for U.K. and Europe models)
Select this icon and press ENTER to switch between FM and AM.
3
TUNED/STEREO indicators
"TUNED" lights up when a signal is received from a radio station.
"STEREO" lights up when a stereo signal is received.
4
Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
PLAYBACK ➤ Listening to FM/AM radio
3
4
81
En