Yamaha Aventage RX-A3040 Owner's Manual page 51

1 2 3 4 5 6 7 8 9 10
ENTER
c Place the microphone base at the listening position and set the
YPAO microphone to the position "1".
• We recommend using a tripod to place the microphone base at ear height.
Use the tripod screws to fix the microphone base in place.
• Do not move the microphone base until the fourth angle measurement
finishes.
d Press ENTER to start the first angle measurement.
The following screen appears on the TV when the first angle
measurement finishes.
e In the same way, perform the angle measurement for the
positions "2" and "3".
f Set the YPAO microphone at the top of the pole and perform the
fourth angle measurement.
Microphone base
The following screen appears on the TV when the fourth angle
measurement finishes.
3
Use the cursor keys to select "Save/Cancel" and
press ENTER.
• To check the measurement results, select "Result". For details, see
"Checking the measurement results" (p.55).
PREPARATIONS ➤ Optimizing the speaker settings automatically (YPAO)
51
En