Yamaha Aventage RX-A3040 Owner's Manual page 48

1 2 3 4 5 6 7 8 9 10
RECEIVER
Cursor keys
ENTER
The following screen appears on the TV.
• To cancel the operation, disconnect the YPAO microphone before starting
the measurement.
6
If desired, select the measuring options.
a Use the cursor keys to select "Multi Position" (p.48) or
"Angle/Height" (p.49) (RX-A3040 only) and press ENTER.
b Use the cursor keys to select a setting and then press ENTER.
• If the cursor keys do not work, the remote control may be set to operate
external devices. In this case, press RECEIVER and then use the cursor
keys.
This completes the preparations. See the following page to start the
measurement.
When "Multi Position" is set to "Yes":
"Measuring at multiple listening positions (multi measure)" (p.53)
When "Multi Position" is set to "No":
"Measuring at one listening position (single measure)" (p.50)
❑ Multi Position
Selects multi measure or single measure.
Settings
Select this option if you will have several listening
positions or if you want others to enjoy surround sound.
Yes You can take measurements at up to 8 different positions
in the room. The speaker settings will be optimized to
suit the area defined by those positions (multi measure).
Select this option if your listening position will always be
fixed. Take the measurements at only one position. The
No (default)
speaker settings will be optimized to suit that position
(single measure).
• If you perform the multi measure, the speaker settings will be optimized for you to
enjoy surround sound in a wider space.
• If you perform the multi measure, first place the YPAO microphone at the listening
position you will be seated most frequently.
PREPARATIONS ➤ Optimizing the speaker settings automatically (YPAO)
48
En