Yamaha Aventage RX-A3040 Owner's Manual page 127

Front Presence
Selects a front presence layout when front presence speakers are used. This
setting facilitates the optimization of the sound field effect.
Settings
Select this option when front presence speakers are installed on the
Front Height
front side wall.
Select this option when front presence speakers are installed to the
Overhead
ceiling.
• This setting is not available when "Configuration (Front Presence)" is set to "None".
Rear Presence
Selects a rear presence layout when rear presence speakers are used. This
setting facilitates the optimization of the sound field effect.
Settings
Select this option when rear presence speakers are installed on the
Rear Height
rear side wall.
Select this option when rear presence speakers are installed to the
Overhead
ceiling.
• This setting is not available when "Configuration (Surround/Front Presence/Rear Presence)" is set to
"None".
Subwoofer
Selects a subwoofer layout when 2 subwoofers are used.
Settings
Select this option when 2 subwoofers are placed on the left and right
Left + Right
sides of the room.
Select this option when 2 subwoofers are placed on the front and rear
Front + Rear
sides of the room.
Monaural x2 Select this option when 2 subwoofers are placed freely.
• This setting is not available when "Subwoofer 1" or "Subwoofer 2" is set to "None".
■
Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from "Meter" or "Feet".
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1,
Subwoofer 2
Setting range
0.30 m to 3.00 m to 24.00 m (1.0 ft to 10.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments
■
Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1,
Subwoofer 2
Setting range
-10.0 dB to 0.0 dB to +10.0 dB (0.5 dB increments)
■
Parametric EQ
Adjusts the tone with an equalizer.
Settings
Select this option when you want to adjust the equalizer manually.
Manual
For details, see "Manual equalizer adjustment".
YPAO:Flat Adjusts individual speakers to achieve the same characteristics.
Adjusts individual speakers to achieve the same characteristics as
YPAO:Front
the front speakers.
YPAO:Natural Adjusts all speakers to achieve a natural sound.
Through Does not use the equalizer.
• "YPAO:Flat", "YPAO:Front", and "YPAO:Natural" are available only when the measurement results of "Auto
Setup" have already been saved (p.47). Press ENTER again to view the measurement results.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
127
En