Resetting Remote Control Codes - Yamaha Aventage RX-A3040 Owner's Manual

Resetting remote control codes

SOURCE
RECEIVER
You can reset a remote control code registered to each input
selection key.
Input selection keys
1
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 1.
2
Press the input selection key.
3
Use the numeric keys to enter "5098".
Once the remote control code is reset successfully, SOURCE blinks
twice.
If it blinks six times, resetting has failed. Repeat from Step 1.
To reset the remote control to factory default settings
a Press CODE SET.
b Press RECEIVER.
c Use the numeric keys to enter "9981".
Numeric keys
CODE SET
CONFIGURATIONS ➤ Controlling external devices with the remote control
150
En