Shooting With A Flash Unit - Sony PMW-10MD Operating Instructions Manual

Shooting with a Flash Unit

You can connect a flash to this unit and freeze the
camera output picture while the flash is lit.
Note
If "Flash" is set to "On" when "Shutter" >"Mode"
is set to "SLS" or "EXSLS" in the Picture Profile
Flash
Camera head
b)
Shooting with flash
1
In the currently active Picture Profile
menu, set "Flash" to "On".
See "Registering and recalling picture profiles"
(page 43) for information about how to recall
picture profiles. See "Basic Menu Operations"
(page 63) for information about menu
operations.
2
Make the following setting under
"Photo" in the OTHERS menu.
Flash TRG: Flash trigger mode (CMOS or
OPEN_CL)
Num of Frames: Number of accumulated
frames for flash execution (4 or 6)
Delay: Delay on flash execution.
When Num of Frames is 4, set 0 and 1 to
8. When Num of Frames is 6, set 0 and 1
to 12.
Number Set: Number of the directory in
which to store the recorded image files
(100 to 999)
60
Shooting with a Flash Unit
c)
menu, "Shutter" >"Mode" is set automatically to
"Off".
For details on usable flash units, contact your Sony
dealer or your Sony service representative.
a)
a) 75Ω coaxial cable
b) Sync cable
c) For connecting the camera
head, see page 21
See "Basic Menu Operations" (page 63) for
information about menu operations.
3
Press the FREEZE/FLASH button to
light it.
Video monitor