Storing/Retrieving The Setting Data; Storing The Setup File; Retrieving The Setup File; Resetting To The Standard Values - Sony PMW-10MD Operating Instructions Manual

Storing/Retrieving the
Setting Data
You can store all the menu settings (including
picture profiles) as a setup file on an SxS memory
card.
By retrieving the stored setup file, the proper
setup condition can be immediately obtained.
For the setup file operations, use "Camera Data"
of the OTHERS menu.
Note
The Clock Set, Time Zone, Color BarType values
are excluded.

Storing the setup file

Only one setup file can be stored on one SxS
memory card.
1
Insert a memory card on which you
wish to store the setup file to a card slot.
Check that the media indication (see page
32) corresponding to the slot is displayed on
the screen. If a memory card in the other slot
is selected, press the SLOT SEL button to
switch.
2
Select "Camera Data" from the
OTHERS menu.
3
Select "Store."
"Cancel" and "Execute" appear to the right.
4
Select "Execute."
Writing of data to the memory card begins.
An in-progress message is displayed during
writing. When writing is completed, a completion
message is displayed.
Notes
• If a setup file already exists on the memory card
1
you specified in Step
whether to overwrite the file is displayed.
• If there is not sufficient space on the memory
card, an error message is displayed.

Retrieving the setup file

When you retrieve the stored setup file, the
settings on this unit are changed according to the
file.
1
Insert the memory card on which you
stored the setup file into a card slot.
Check that the corresponding memory card
icon is displayed in the monitor screen. If a
memory card in the other slot is selected,
press the SLOT SEL button to switch.
2
Select "Camera Data" from the
OTHERS menu.
3
Select "Recall."
"Cancel" and "Execute" appear to the right.
4
Select "Execute."
Reading of data from the memory card
begins.
An in-progress message is displayed during data
reading. When the read-out is completed, a
completion message is displayed. The settings
have been changed according to the setup file.

Resetting to the standard values

The current settings you made through various
menu and button operations can be collectively
returned to the standard statuses (factory-default
value) by executing "All Reset" of the OTHERS
menu.

Storing/Retrieving the Setting Data

, a message to confirm
53