Screen Display Settings - Sony PMW-10MD Operating Instructions Manual

Screen Display Settings

By pressing the DISPLAY button to turn on the
information display, you can display the
information shown in the following figure. The
information is superimposed on the camera
output picture in the monitor screen.
To select the information to display
You can use "Display On/Off" (see page 66) in
the VIDEO SET menu to select the information to
display in the monitor screen.
1.
Timecode indication
Displays timecode (real time).
CLK **:**:**.**: Timecode display in
drop-frame mode (when Country in the
OTHERS menu is set to NTSC Area)
CLK **:**:**:**: Timecode display in
non-drop-frame mode (when Country in
the OTHERS menu is set to PAL Area)
2.
Media indication
When an SxS memory card is loaded in
either of the memory card slot: Displays
the SxS memory card slot in which the
memory card is loaded.
When SxS memory cards are loaded in
both of the memory card slots: Displays
the currently selected SxS memory card
slot.
32
Screen Display Settings
Note
Warning and error messages (15) and
notifications and confirmation messages (16)
always appear as required, regardless of the state
of the DISPLAY button. It is not possible to hide
these messages with the Display On/Off settings
of the VIDEO SET menu.
Note
No indication appears when memory cards
are not inserted or the memory card in the
selected slot is protected.
3.
Operation status indication
Displays the operation status of the SxS
memory card being currently used.
zREC: Recording
STBY: Recording standby
FREEZE: Freeze (displaying still image)
zREC/FRZ: Freeze during video recording
CAPTURE: Capturing still image
REVIEW: Recording review
Note
With the exception of the FREEZE
indication, no indication appears when
memory cards are not inserted or the memory
card in the selected slot is protected.