Connection Between The Camera Head And Ccu; Connecting The Camera Cable To The Camera Head; Connecting The Camera Cable To The Camera Connector - Sony PMW-10MD Operating Instructions Manual

Connection between the
Camera Head and CCU
Connect the camera cable connector on the
camera head with the CAMERA connector on the
CCU using the optional CCMC-T05/T10/T15/
T20 Camera Cable.
Notes
• Be sure to turn off the power supply for all
equipment when you connect or disconnect the
camera cable. Connecting/disconnecting a
cable while the power is on may damage this
unit.
• Be sure to connect the camera head and CCU
with the camera cable before you turn on/off the
power of the CCU.
• Insert the connector by pushing it straight in,
being careful not to bend the pins.
• Insert the connectors of the cables properly.
Loose connection often generates noise. When
pulling out a cable, be sure to pull it out by the
connector, not the cable itself.
• Starting this unit may require more time than
normally when you start it for the first time after
exchanging the camera head.
• The CCU is designed to be used with this
camera head. Use both together for optimum
picture quality.
Connecting the camera cable to
the camera head
Positioning marks
1
Align the positioning marks on the
camera cable connector and on the
camera cable round plug, and then push
the plug in.
Connector ring
2
Turn the connector ring to tighten.
Connecting the camera cable to
the CAMERA connector
1
Connect the camera cable square plug
to the CAMERA connector.
2
Tighten the two screws on the square
plug.

Connection between the Camera Head and CCU

21