Disks - Bosch Divar 700 Series Installation And Operation Manual

96 en | Advanced configuration
–
–
6.10.2

Disks

Figure 6.25 Configuration menu - Storage - Disks - In use
In use
View the properties of the disks in use in the active disk set.
–
–
–
F.01U.246.471 | v3.4 | 2011.06
RAID 4 is active, the storage available for video recording is equal to three times the size
of the smallest disk in the set. The fourth disk is used for parity information.
If a single disk fails, no data is lost. Recording continues on three disks without RAID 4
protection. Once the defective disk has been replaced, the data on the new disk is rebuilt
(this process typically takes about 24 hours) while normal operation continues.
Overwrite after - The oldest video is automatically overwritten when the disk set is full.
Overwriting can be forced to a shorter time period if required, for example, for legal
purposes.
The total disk set capacity is shown in gigabytes.
The capacity of each disk is shown in gigabytes.
Remove disks from the active disk set by clicking Remove.
Click to select an individual hard disk from the list.
– Click Properties to view the status of the selected disk.
Installation and Operation manual
Divar 700 Series
Bosch Security Systems