Playback - Bosch Divar 700 Series Installation And Operation Manual

52 en | Operating instructions
–
–
–
The archive list is saved until archiving is carried out. Video segments that have been partially
overwritten or deleted fromthe internal hard drive(s) are removed from the list.
–
–
–
–
If the total size of the video segments is greater than the memory device's free space, then
only the first segments that fit are archived. Those segments that are not archived remain in
the list so that they can be archived to a new device.
5.7.2

Playback

Figure 5.13 Local playback menu
By default, the unit uses the local disk set to perform playback operations. This panel allows
locally attached devices with archived data to be selected as a source for playback. This
feature allows verification of exported video data locally on the unit.
–
–
–
Local archive playback only works with native format archives.
F.01U.246.471 | v3.4 | 2011.06
To add another video segment to the list, click Add.
To change a video segment in the list, select it and click Change.
To remove a video segment from the list, select it and click Remove.
Place a check mark next to Authenticity check to authenticate the video segments
before archiving.
Select Start to write the video segments to the destination device.
Select Stop to cancel the archiving process.
Select Details for an error report if the authenticity check or archiving is unsuccessful.
Current source shows the device currently selected for playback.
Select a source file name from the list.
Select Start Local Playback to playback from the selected source.
Installation and Operation manual
Divar 700 Series
Bosch Security Systems