Divar 700 Series
6.9.4
IP Range
Figure 6.20 Configuration menu - Network - IP range
–
–
Only workstations (with the Bosch Video Client or Configuration Tool) that have an IP address
in one of the specified ranges can gain access to the unit.
6.9.5
Monitor Streaming
The remote monitor streaming function, which is only available on hybrid units, allows
monitor output A and/or B to be streamed remotely via one or more of the analog video
inputs. The main advantage of using this feature is that multi-screen images can be viewed
remotely using just one video stream, thus requiring only a limited amount of network
bandwidth and computer resources.
Each of the analog video inputs can be configured as:
–
–
–
Note:
Disable the recording of a channel used for monitor streaming in the Recording tab.
Bosch Security Systems
Eight IP ranges can be entered to allow access.
Enter the same begin and end address to specify a single IP address. Enter different
begin and end addresses to specify an IP address range.
Camera input (default).
Streaming output A (input is used to stream monitor output A).
Streaming output B (input is used to stream monitor output B).
Installation and Operation manual
Advanced configuration | en
F.01U.246.471 | v3.4 | 2011.06
91