Advertisement
Installation Instructions
WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS []
Are these
the right instructions
for your model?
Follow
the Installation
Instructions
indicated
by
the label
on the back of the refrigerator--
[] []
[] []
[]
[]
[] []
[]
[]
[] [] or []
BEFORE YOU BEGIN
Read each step thoroughly
before
proceeding.
° Cd_kUTION-
Unplug the
_
Refrigerator.
To eliminate
the danger
IJ_)
of electric
shock during installation,
you must unplug
the refrigerator
from
its electrical
outlet.
TOOLS YOU WILL NEED
Flatblade andPhillips
Pliers
screwdrivers
Sharpknife
1/4" and5/16" Nutdrivers
[] ATTACH THE WATER VALVE
• Locate the female
connector
plug (C). Plug the
female
connector
(C) onto the male terminals
on
the water valve (4). Either
wire can go on either
terminal.
• Fasten
the water valve to the cabinet
edge hole
with the hex-head
screw (13) from the kit.
DO NOT DRILL ANYADDITIONAL
HOLES.
• Check
the plastic water line nut on the bottom
of the water valve to be sure it is hand
tight.
DO NOT USE TOOLS.
[] INSTALL
WATER LINE CLAMP
• Attach
the water line clamp (strain
relief) (8) from
the kit to the refrigerator.
With the clamp directly
in line with the water valve, drive the screw (7)
from
the kit through
the clamp(8)
at the indent
into the back of the cabinet.
• The metal clamp
is for the house water line (see
Water
Line Installation
Instructions).
It is not to
be used for the tubing from the water valve up to
the icemaker.
52
Advertisement
