Advertisement
Installation Instructions
[] INSTALL THE ICEMAKER FILL CUP
Install the icemaker
f'dl cup (side-mounted)
(18)
into the icemaker
as shown.
@
[_PLUG IN THE ICEMAKER
Hold the icemaker
in the freezer
compartment
as
shown. Insert
the icemaker
power cord plug
(B)
into the socket
on the rear wall, making
sure the
prongs
and holes are matched.
Press the plug
firmly into the socket.
[] REINSTALL THE ELECTRIC PLUG
COVER
If the plug cover removed
in Step 1 matched
Figalre 1, continue
to Step 9.
If the plug cover removed
in Step 1 matched
Figure 2, it must
be reinstalled.
• Remove
the break-out
tab on the left side of
the cover. Hold the cover and twist off the tab
with pliers.
• Place the cover over the electric
plug with the
power cord running
through
the opening.
• Insert
the tabs in the top or bottom
and snap
the other
end in place.
IMPORTANT:
This cover will help keep the
electric
plug from coming
out of the socket when
mounting
the icemaker.
Be sure to install it now.
®
[] MOUNT THE ICEMAKER
• Lift the icemaker
so the fill tube extension
(!0)
fits in the Fdl cup opening
(C). Hang
the
icemaker
on the two mounting
screws (A).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube extension
(10) is still in the fill cup
opening.
(Check
the rear of the refrigerator
to
make sure the fill tube has not been pushed
out
of the back of the refrigerator.)
• The icemaker
mounting
screws are located
in
the uppermost
position
of the mounting
slots.
THEN SECURELY
TIGHTEN
THE
(_
@
ICF__AKF_
_)
MOUNTING
SCREWS.
I_INSTALL
THE ICE BUCKET
Put the ice bucket (11)
directly under
the
icemaker
(to the left
and all the way to the
rear of the shelf under
the icemaker).
The straight 2-position
shelf should be in the
lower position. The step
shelf's lower step should
be under the icemaker.
The cantilever
shews top hooks should be in the
6th slot up from the bottom
of the track.
Make sure the icemaker
power switch is set to O (off).
[]
ATTACH WARRANTY LABEL
A label (9) is provided
with this kit to record
the
date of installation
for warranty
purposes.
Apply it
to the back of the refrigerator.
[]
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker
installation
inside the freezer
is now
complete.
Continue
to the Water Valve Assembly
section.
15
Advertisement
