Figure 90: Cp Activation And Activity Status; Table 74: Cp Activation And Activity Status - D-Link DWS-3000 Series User Manual

Software User Manual
02/15/2011
The CP Activation and Activity Status page has a menu that contains all captive portals configured on the switch. When
you select a captive portal, the activation and activity status for that portal displays.
Table 74 describes the information that displays for each portal.
Field
Operational Status
Disable Reason
Blocked Status
Authenticated Users
The following buttons are available on the CP Activation and Activity page:
• Block—Click Block to prevent users from gaining access to the network through the selected captive portal.
• Unblock—If the Blocked Status of the selected captive portal is Blocked, click Unblock to allow access to the network
through the captive portal.
• Refresh—Click Refresh to update the screen with the most current information.
Document 34CS3000-SWUM104-D10

Figure 90: CP Activation and Activity Status

Table 74: CP Activation and Activity Status

Description
Indicates whether the captive portal is enabled or disabled.
If the captive portal is disabled, then this field indicates the reason. The portal instance may
be disabled for the following reasons:
• None - CP is enabled.
• Administratively Disabled
• RADIUS Authentication mode enabled, but RADIUS server is not defined.
• Not associated with any interfaces.
• The associated interfaces do not exist or do not support the CP capability.
Indicates whether authentication attempts to the captive portal are currently blocked.
Use the Block and Unblock buttons to control the blocked status. If the CP is blocked, users
cannot gain access to the network through the CP. Use this function to temporarily protect the
network during unexpected events, such as denial of service attacks.
Note: The Blocked Status is the operational status and not the configured status. It does not
persist over a reboot. By default, the status is unblocked.
Block and Unblock are only available when the CP operational status is Enabled.
Shows the number of users that successfully authenticated to this captive portal and are
currently using the portal. The range is an integer. The default is 0.
D-Link Unified Access System
Page 183