Viewing Ip Discovery Status; Monitoring Peer Switch Status; Figure 58: Wireless Discovery Status - D-Link DWS-3000 Series User Manual

D-Link Unified Access System

Viewing IP Discovery Status

From the Monitoring > Global > IP Discovery tab, you can view information about communication with the devices in the
IP discovery list on the Administration > Basic Setup > Discovery page.
The status is in one of the following states:
• Not Polled—The switch has not attempted to contact the IP address in the L3/IP Discovery list.
• Polled—The switch has attempted to contact the IP address.
• Discovered—The switch contacted the peer switch or AP with IP address in the L3/IP Discovery list and has
authenticated or validated the device.
• Discovered - Failed—The switch contacted the peer switch or AP with IP address in the L3/IP Discovery list and was
unable to authenticate or validate the device.
Click Refresh to update the screen with the most current information.
If the device is an access point, an entry appears in the AP failure list with a failure reason.
For information about adding IP addresses to the IP Discovery list, see
Switch" on page 66.

Monitoring Peer Switch Status

The Peer Switch page provides information about other D-Link Unified Switches in the network. To access the peer switch
information, click Monitoring > Peer Switch.
Peer Unified Switches within the same peer group exchange data about themselves, their managed APs, and clients. The
switch maintains a database with this data so you can view information about a peer, such as its IP address and software
version. If the switch loses contact with a peer, all of the data for that peer is deleted.
Page 122

Figure 58: Wireless Discovery Status

Software User Manual
"Configuring IP Addresses of Peers and APs in the
Document 34CS3000-SWUM104-D10
02/15/2011