Table of Contents
Advertisement
7-6 The Session Management™ Screen Pages
COPY and LINK in general
Copy and Link functions can be performed either
locally in the channels sections, known as 'Quick
Copy' and 'Quick Link', or via GUI control.
Using the 'Quick' method, Copy and Link may be
combined into a single operation that allows Copy and
Link simultaneously. Since Copy and Link functions
can be performed together they will both be described
in this section.
QUICK COPY
Channels may be copied without using the GUI. This
is accomplished using the upper row of {ACCESS}
buttons, as follows:
• Push and hold down the upper {ACCESS} button
for the source channel.
7-54
Chapter 7 Session Management
SNAPSHOTS, COPY & LINK GUI displaying the Copy DEFAULTS
• Its {ACCESS} will light, first red and then turn
amber after half a second.
• When it has changed to amber, select the upper
ACCESS buttons for the destination channels, one
by one.
This method is often quicker than using the GUI,
particularly for small numbers of channels.
The control settings copied in 'Quick Copy' are set
according to what is highlighted in the Copy
DEFAULTS panel displayed on the COPY page.
Click on COPY in the banner at the top of the GUI to
see the Copy DEFAULTS.
Note
Quick Copy will copy static settings only. Automation
data must be copied using GUI operations.
Advertisement
Table of Contents
