Name The Artist/Project And Title - Sony OXFORD Operation Manual

7-5 Mixing Overview

7-5-2 Name the Artist/Project and Title

To name ARTISTS/PROJECTS and TITLES
1
On the Control Keyboard, press {PROJECT}
{ENTER} for a large pop-up to type in a name. Use
the QWERTY keyboard to type in a suitable name,
then either click on OK on the screen or press
{ENTER} on the keyboard. Selecting OK or
{ENTER} without a name will automatically enter a
default name, Project 1 (or the next available).
After a Project is named a Title pop-up will appear
automatically.
2
To name subsequent Titles, press {TITLE}{ENTER}
on the Control Keyboard. A large pop-up will
appear, prompting the user to type in a name. Use
the QWERTY keyboard to type in a suitable name
then select OK on the screen or {ENTER}.
7-10
Chapter 7 Session Management
Artists/Projects & Titles screen
Selecting OK or {ENTER} without a name enters
the next available default.
3
All dynamic data such as fader moves and cuts
have to be time-related, so it is necessary to set
start and end times for each Title. Move the
orange cursor to the START column, alongside the
new TITLE just named.
4
Click on the START column or press {EDIT} on the
Control Keyboard to display a pop-up to type in
the start time. Alternatively, enter time 'on the fly'
by pressing {NOW} on the Control Keyboard at the
appropriate instant whilst the tape is rolling. Roll
back and repeat if incorrect.
5
Repeat steps 3 and 4 in the END column for the
end time.