Table of Contents
Advertisement
To name Scribbles
To name or edit a Scribble entry, highlight it and use
the same procedure as is used for naming Tracks. A
maximum of 6 characters may be typed in.
Load Scribbles
The Scribble entries can be propagated from Track
List 1 and 2 to the Scribble entries in the I/O GUI
pages according to the routing of MT1 and MT2.
Click on LOAD to propagate the Scribble names to the
appropriate channel I/O M/T Scribble entries.
Click on AUTO to highlight so that channel I/O
scribbles are 'on line'. In other words any edits to
track lists are propagated immediately.
Importing Track Lists
At the IMPORT block, click on TRACK LIST 1 or 2
TRACK LISTS screen displaying the IMPORT TRACK LIST 1 pop-up
for a pop-up. Click on the appropriate $ icons for
pop-ups, or just click (and click) on the name banners
to cycle through what is available. It is possible to
view the full TITLES pop-up whilst clicking on the
ARTIST/PROJECT BANNER. Having located the
desired source Track List to be imported, click on OK
or {ENTER} on the Control Keyboard.
Printing Track Lists
At the PRINT block, click on TRACK LIST 1 or 2
respectively for the print pop-up. Make sure the
correct printer destination is displayed and click on
OK or {ENTER} on the Control Keyboard.
Command Dialogue
At the base of the screen, the User Command Dialogue
Line bar displays commands from the dedicated
Control Keyboard and QWERTY Keyboard for
confirmation before {ENTER}.
Chapter 7 Session Management
7-47
Advertisement
Table of Contents
