Step 2 Checking Equipment Connections
Verify that all devices connected to the network are correctly installed and set up.
Checking the remote mode
The display of the DWR-R01D can be used to check whether the receiver currently operates in ST mode or NT
mode.
To show the remote mode on the display, press the RF REMOTE button on the front panel.
Remote mode indication
Display whether the receiver is operating in the ST mode or NT mode. (The mode can only be displayed.)
NT: The receiver has recognized the RMU-01 unit and is operating in NT mode.
ST: The receiver is operating in ST mode.
SEARCH: The receiver is searching for the remote mode state.
RF REMOTE menu button
Remote mode indication
Making and Checking Network Settings
69