Configuring a DWX System
System configuration examples
Configure the system while referring to the following examples.
Configuring an ST mode system
When operating from the receiver only
One DWR-R01D or DWR-S01D unit
Transmitters
DWR-R01D
: WiDIF-HP
: Cross Remote
Figure 1
Note
When using the DWR-S01D, a configuration for operation from the
receiver is the only option.
Multiple DWR-R01D or DWR-S01D units (2 to 3)
Transmitters
DWR-R01D
Figure 2
Note
When using the DWR-S01D, a configuration for operation from the
receiver is the only option.
58
Network System Configuration
or
DWR-S01D
DWR-S01D
or
or
or
When operating from the receiver and a computer
One DWR-R01D unit
Transmitters
DWR-R01D
Crossover cable
Figure 3
Note
Use a crossover cable to connect the DWR-R01D to the
computer.
Multiple DWR-R01D units (2 to 3)
Transmitters
DWR-R01D
PC
(1 to 6)
Figure 4
Note
Use straight cables for all connections.
PC
Hub
Straight cable