2.4 GHz area operation check
Checking with the DWR-R01D display
Use the "Cross Remote" control condition indication to check whether the transmitter is in the 2.4 GHz area.
"Cross Remote" control condition indication
Indicates the signal transmission condition of the "Cross Remote" control function (four levels).
When the "Cross Remote" control function is off, this indication does not appear.
Checking with Wireless Studio
Use the "Cross Remote" control condition display to check whether the transmitter is in the 2.4 GHz area.
"Cross Remote" control condition display
Indicates the communication status of the paired transmitter according to four levels.
This icon does not appear when the "Cross Remote" function on the DWR-R01D is turned off.
: Good transmission
: Somewhat good transmission
: Somewhat poor transmission
: Poor transmission
: Unable to communicate with paired transmitter
: Good transmission
: Somewhat good transmission
: Somewhat poor transmission
: Poor transmission
(red indication): Unable to communicate with paired transmitter
"Cross Remote" control
condition indication
"Cross Remote" control condition display
Making and Checking Network Settings
65