3. REPLACING THE IMPORTANT PARTS
3.13 Replacing the Feed Gap Sensor (Upper)
1. Refer to section 3.1 to remove the top cover.
2. Refer to section 3.2 to remove the lower cover.
3. Remove the sensor connector from the main PC board.
4. Use the Phillips screwdriver to remove the screw from the sensor plate.
5. Remove the sensor plate.
6. Remove the feed gap sensor (upper).
3.13 Replacing the Feed Gap Sensor (Upper)
3-26
EO18-33025
(Revision Date: Mar. 27, 2009)
Main PC Board
Sensor Connector
(JP34)
T-1.5x4 Screw
Sensor Plate
Feed Gap Sensor (Upper)