Key And Led - Toshiba B-EV4 Series Manual

1. OUTLINE

1.4 Key and LED

The [FEED] button operates as FEED button or PAUSE button depending on the printer statuses.
As the FEED button
As the PAUSE button
The indicator lamp lights up or flashes in different colors depending on the printer statuses. The main
indicator lamp statuses and the corresponding printer statuses are shown inside the top cover.
Color
Green Lights up
Green Flashes fast
Green Flashes slowly
Green/Red Flashes slowly
Red Lights up
Red Flashes fast
Flashes at
Red
medium speed
Red Flashes slowly
Orange Flashes fast
Flashes at
Orange
medium speed
None Unlit
FEED Button
Pressing this button when the printer is in online state causes a media feed.
Pressing this button after removing a cause of an error returns the printer to
online state.
Pressing this button during printing stops printing after completing the current
label. The printer resumes printing when this button is pressed again.
Status
Stand-by
Communicating with a host.
Printing is temporarily stopped (paused).
The print head temperature exceeded the upper limit.
A communication error occurred. (Only when the RS-232C is used.)
A paper jam occurred.
The media is ended.
An issue or feed was attempted with the top cover opened.
A paper jam occurred din the cutter unit. (Only when the cutter unit is
fitted.)
The ribbon is ended.
The top cover is open.
STATUS Lamp
Printer status
1-8
EO18-33025
1.4 Key and LED