Ptz Setup - Bosch MIC612 Installation Manual

MIC612 Thermal Camera
Camera Setup Menu Choices:
Menu
Exit
White
Balance
Night Mode Switches from color to
Wiper
7.3

PTZ Setup

The Pelco PTZ Setup Menu provides access to the PTZ settings such as tours, scan speed,
presets, limit stops, recording, and AutoPivot.
* Edit Tour 1...
* Edit Tour 2...
* Tour 1 Period:
* Tour 2 Period:
* Scan Speed
* Limit Stops:
* Recording:
* Autopivot:
Bosch Security Systems, Inc.
Description
Exits the menu.?
Sets a default value in
case the Pelco
controller disables the
white balance.
monochrome.
PTZ Setup
Exit...
Edit Presets...
* = Factory Setting
Focus / Iris: Select
On-Screen Display (OSD) Menus (Pelco Protocol) | en
Sub-menu / Description
OUTDOOR: Sets a default setting if
the controller disables white balance.
INDOOR: Sets a default setting if the
controller disables white balance.
ON: Sets Night Mode on.
OFF: Sets Night Mode off.
AUTO: Sets Night Mode to Auto set.
ON/OFF: Activates/deactivates the
selected wiper mode, respectively.
CONTINUOUS: Wiper wipes
continously until deactivated
manually or by the five-minute time-
out built in to the system.
INTERMITTENT: Wipes twice, then
turns off after 15 seconds.
ONE SHOT: Wipes five times, then
turns off.
WASH WIPE: Wiper washes and
wipes.
5 sec
5 sec
30 deg/sec
OFF
"A"
ON
Installation Manual
55
Default Setting
OUTDOOR
ON (Day/Night
models only)
Continuous
F.01U.249.416 | 2.0 | 2012.09