APPENDIX B Overview of the Instructions
APPENDIX B
This section describes the instructions used for the F
■
Overview of the Instructions of the F
2
The F
MC-8L has 140 kinds of 1-byte machine instructions (actually, the map is 256 bytes). An instruction
and succeeding operands make an instruction code.
Figure B-1 shows the correspondence between the instruction codes and instruction map.
Figure B-1 Correspondence between Instruction Codes and Instruction Map
•
The instructions are classified into four groups including transfer instructions and branch instructions.
•
Various methods for addressing are supported. Depending on the selection of an instruction and
specification of operands, 10 kinds of addressing can be selected.
•
Bit manipulation instructions are supported, so read-modify-write operation is possible.
•
Instructions directing special operations are supported.
380
Overview of the Instructions
1 byte
Machine
Instruction code
instruction
Higher 4 bits
2
MC-8L.
2
MC-8L
0 to 2 bytes are provided depending
on the instruction.
Operand
Operand
[Instruction map]