Audiovideo Menu - Mitsubishi Electric HD-6000 Owner's Manual

AudioVideo Menu
Figure 25
Figure 25. Audio/Video Menu, Settings
A/V Memory Reset
AiV Memory Reset allows you to seHect the device
which will have the AiV Settings returned to the
odginaH factory settings. To return a device's memory
to the odginaH factory settings, seHect the device and
then press ENTER.
Settings
Each device has its own AiV memory. SeHect the
device in A/V Memory Reset, then seHect Audio or
Video to adjust the device's individuaH settings. Press
ENTER, the menu is removed, and the individuaH
settings are dispHayed.
If using the HDTV receiver/controller with the LT-4260
dispHay, use the AUDIO and VIDEO buttons on the
remote controH to change settings, as these options
are not accessibHe from this screen.
Figure 26. Scan Rate Output
Figure 2Z Scan Rate Confirmation screen
Use ADJUST • or • to select the individual settings
for adjustment. Use ADJUST • or _"to adjust. For
descriptions of the individual AiV settings see AiV
Setting Descriptions, pages 81 and 82.
Scan Rate Ouput
Figures 26 and 27
Allows you to adjust the scan rate output from the
HD-6000 to the TV, display, or LCD. If you choose
Automatic, the HD-6000 will select the scan rate, or
you can select 1080i, 720p or 480p for the output
format. When you select Test, the main screen will
change to the selected Output Format and a small
screen will display, allowing you to select OK to make
Video Mute
Video Mute lets you display a blue background when
no signal is being received on Inputs 1-3, MonLink, PC,
Components 1-2 and Input DTV.
AnaJog Audio Output
If speakers are connected to the TV or monitor or you
are using the internal TV speakers, select Variable.
This allows you to control the volume with the HD-
6000 remote control, if speakers are connected to
the AiV receiver, select Fixed. When NetCommand ®
is enabled, selecting the AiV receiver icon from the
Device Selection menu automatically turns Off the TV
speakers.
Note: To prevent damage from a sudden increase
in volume, make sure the volume is set to low before
setting speakers to ON.
8O