Mitsubishi Electric HD-6000 Owner's Manual page 14

Back PaneJ, continued
and right audio outputs to speakers that are either
buiHt into the monitor or connected to it.
HDMi input used in conjunction with an A/V
receiver. If you are using an HDMI input to your
dispHay monitor and want to send anaHog audio to an
AiV receiver, connect the OUTPUT to DispHay Heft and
right audio outputs to the AiV receiver. Note that in
addition to these anaHog audio connections, you must
aHso connect the HD-6000 DigitaH Audio Output to the
AiV receiver digitaH audio input.
8. Componentol, o2 inputs
YPbPr (480i/480p/720p/1080i)
These inputs can be used for the connection of devices
with component video outputs, such as a high definition
cable box, satellite receiver, DVD player or compatible
video game system. Please see Appendix B for signal
compatibility.
9. Antenna
(ANT-I MAIN, ANT-2 AUX)
ANT-1 MAIN and ANT-2 AUX can each receive both
digital and analog over-the-air channels from a VHF/UHF
antenna or non-scrambled digital/analog cable channels.
Your primary viewing signat source should be connected
to ANT-1 MAIN. ANT-1 MAIN must be used to view
premium subscription cable TV service authorized
by the CabIeCARD
TM
access card. The CabIeCARD
access card is provided by your local cable company.
ANT-2 AUX can continue to receive over-the-air or non-
scrambled cable signals.
10, Jnput-DTV YPbPr/RGB HV
(480ii480p/720pi1080i)
This input is used to connect an external DTV receiver,
and can be configured for YPbPr or RGB plus H&V signal
types. Please see Appendix B for signal compatibility.
11. MonitorLinkTM/RSo2320 ControJ
When used with a Mitsubishi HD upgradeabIe TV or fiat
panel display this digital control interface wilI work in
conjunction with HDMJ. While HDMI provides the digital
video signal, the RS-232C control provides enhanced
functioning such as automatic power ON/OFF and input
selection for the compatible Mitsubishi TV or display
panel.
12. CabJeCARD
TM
SJot
The CableCARD access card provided by your cable TV
service provider is inserted into this slot. The top of the
card should face upwards.
CableCARD is a nationwide standard system that allows
your local cable TV provider to supply you with an
14
access card customized to your account. This card
allows the TV to receive, decode and unscramble the
premium digital channels included in your cable TV
subscription without the use of a cable box. See page
18 for additiona! CabJeCARD information and activation
instructions.
If your cable company is not currently offering
CabIeCARD access cards, you will need to use a
cable box provided and authorized by your local cable
company to view scrambled channels.
13. JEEE 1394
These jacks allow the HDTV receiver/controller to
connect to external JEEE 1394 digital products by
means of a single cable. Three jacks are provided for
this purpose, which allow for a high degree of flexibility
for connecting your NetCommand controlled system.
Detailed information regarding EEE 1394 connection
requirements are in Chapter 4.
14. DigitaJ Audio Output
This output will automatically send Dolby® Digital audio
from digital channels and iEEE 1394 devices to a digital
Audio/Video receiver. Connect this output to the A/V
receiver's coaxial digital audio input. The output will
automatically turn off when viewing an analog channel or
device, except when using the TV Disc, which converts
analog audio to digital. Use Output to Display to send
analog sound to your A/V receiver.
Some digital cable channels send MPEG-1 digital audio
instead of DoJby Digital, however, not all A/V receivers
can decode MPEG-1 digital audio. This can cause the
A/V receivers to produce a loud noise that can damage
speakers. For this reason, the HDTV receivericontrolIer
will automatically turn off the digital audio output when
tuned to a channel or device that has MPEG-1 digital
audio and send it to the A/V receiver as analog left and
right audio from Monitor Output.
15. Monitor Output
The Monitor Output sends the HDTV receiver/controller's
audio and video signals from the antennas or inputs to a
VCR. This output is for recording only. Do not connect
to an A/V receiver.
16, LT-4260 Authorized Card Reader
This port connects to the Mitsubishi LT-4260 flat
panel LCD TV, to enable using an authorized media
card reader built into the display panel. This reader
supports MultiMediaCard
TM,
SD Media Card,
SmartMedia
TM.
CompactFlash® and/or MEMORY
STICK
TM.
Cards up to 128mb, may have a file format of
FAT 16 (block size = 1024 or 2048).