Antenna Menu - Mitsubishi Electric HD-6000 Owner's Manual

Antenna Menu
Antenna Menu
Figure 14
Figure 14. Antenna Menu
The Antenna Menu options are avaiiabb for use with
anabg and digitai channeis on Antenna-1 and Antenna-
2. You can memorize channeis, add or debte channeis,
name channeis and add channeis to an SQV (Super
Quick View TM)bank.
For Antenna 1 (Main} or Antenna 2 (Au×}
Seiect either Air (when used with an indoor/outdoor
antenna) or CaMe (when used with direct came)
then press ENTER to start the automatic channei
memorization process. If a CabHeCARDTMis being
used, memorized channeis are provided by your cabb
provider through the CabbCARD.
To stop the automatic channei memorization process,
press CANCEL. Channeis memorized before you
pressed CANCEL are retained in memory.
After memorizing channels, the channels in the memory
can be accessed in ascending or descending order by
pressing CH • or •.
The memorization will occur twice, as the HDTV
receivericontrolbr memorizes analog and digital
Prefer Digital
When a memorized channel is available as both analog
and digital, a check mark in the Prefer Digital box will
allow digital channels to display and analog channels to
be hidden (when using CH). Removing the checkmark
will show both analog and digital choices.
Channels can be changed in 3 ways:
1. By pressing ADJUST • or • to select the channel.
2. By pressing CH • or • for channels already in
memory.
3_
Directly entering the number. With so many current
and potential channels, the number range is greatly
expanded. Channels can be one part, analog or
digital (up to the number 16888) or two part, for
digital channels (these use a separator). For a
two part digital channel, you may press SUB/
CANCEL on the remote to enter a separator after
the first, second or third number, depending on the
broadcaster's channel information.
For digital channels, when the broadcaster has
sent a virtual channel number, the virtual channel
number is shown in the text box and as a reference,
the original digital channel is shown below the text
box_
After the available channels have been memorized
with Memorize, weaker channels can be added.
Unwanted channels can also be deleted. Press CH
• or • on the remote control to see the channels
in memory. Press ADJUST • or • to select Added
or Deleted for the channel shown in the Channel
number box.
Analog channels shown on Antenna-1 or Antenna-2
can be named (up to four characters). After you enter
a name, it will appear on the TV screen, next to the
channel number.
1. Press ADJUST • or • to select each letter.
2. Press ENTER to set the letter and move to the
next letter position.
3. Press CANCEL to move back one position.
Digital channels are automatically named if the
broadcaster sends the information.
72