Table of Contents
Advertisement
Panasonic Electric Works Nordic AB
MEW01091
27.4
Action
"Access"
Scroll to menu H4.
"A"
Scroll to menu U4.
"A"
"Return"
Rev: 3
Sensors activating SERVICE signal (H4/U4)
Service signal is indicated by LED "Service" (L12).
average sensor value is over the service level respectively for one or
more sensors. (Regarding the service signal levels, see Planning
Instructions, chapter "Service signal".
Menu H4/U4 is a list of the sensor(s) activating service signal.
NOTE! Service signal is only information that a sensor has to be
cleaned / replaced soon. The service signal has to be acknowledged,
see chapter "Acknowledge SERVICE signal (H8/S1)", page 119.
Text in display
Present system status on display
Disablement
Sensors activating SERVICE signal
Sensor : ZZ-AA (technical address aaa)
needs service
Sensors activating SERVICE signal
EBL128 Operating Instructions V1.1.x
ACCEPT? H4
ACCEPT?
ACCEPT?
ACCEPT?
100
The week
Comments
According to chapter
"Access", see page 78.
U1
Press "A" to accept.
U4
L = a list in which you
L
can scroll. Press "Return"
to menu U4. (If there are
no sensors in the list,
menu U4 will be shown
again.)
Scroll or press "Return"
U4
to menu H4. Scroll or
press "Return" to log off.
Advertisement
Table of Contents
