Set Calender And Clock (H3); Present System Status (H4); Sub Menu List (U1 - U8) - Panasonic EBL512 User Manual

8. SET CALENDER AND CLOCK (H3)

a) Log on to the c.i.e.
b) Navigate to menu H3.
c) Press . Depending on if it is the date, time and/or the day that shall be set, press
d) Use the keypad to enter new values. Press
To exit the menu without making any changes, press ESC.

9. PRESENT SYSTEM STATUS (H4)

Information only. If the c.i.e. has a printer it is possible to get a print-out from some of the sub menus
U1-U8.
a) Log on to the c.i.e.
b) Navigate to menu H4.
c) Press . A sub menu list (U1 – U8) will be displayed.
9.1. SUB MENU LIST (U1 – U8)
U1
Disablement
U2
Disablement by time channel
U3
Open doors
U4
Sensor values
U5
Sensors activating service signal
U6
Technical warning
U7
Event log
U8
Information
.
Disablements, except "disablements by time channel", are displayed.
Indicated by LED "General disablements".
Only "disablements by time channel", are displayed.
Indicated by LED "General disablements".
If any door in the system is open, the open door symbol is shown.
Information on heat, smoke or multi detector sensor values.
Service signal is acknowledged via menu H8/S2, which require log on with a password for access level
"Service personnel".
If one or more technical warnings are activated in the system, the technical warning symbol is shown.
• Alarm log – Alarm events.
• Interlocking log - Interlocking events only.
• General event log – All other type of events.
• Main board version: x.x.x
• MMI board version: x. x.x
• Alarm counter: nnn
• Max number of allowed alarm points: xxx
• Serial number: xxxxxxxx
• Control unit: NN
12
and to highlight it.