Console Redirection Submenu - Fujitsu PRIMERGY RX200 S2 User Manual

Chapter 8 Hardware Configuration/Utilities

8.2.16 Console Redirection Submenu

Appears when [Console Redirection] is selected from the [Server] menu.
This submenu configures detailed settings for console redirection.
Console Redirection Port:
Port:
Media Type:
Console connection:
Baud Rate
Protocol:
Flow Control
Mode:
F1 Info
Exit
Esc
Item
Console Redirection Port
Port
Media Type
Console connection
230
PhoenixBIOS Setup Utility
Server
Console Redirection
[Disabled]
Serial
[Serial]
[Direct]
[9600]
[VT100+]
[None]
[Enhanced]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the Console Redirection Submenu
Setting
• Disabled (at the time of
purchase)
• Enabled
Serial
• Serial (at the time of
purchase)
• LAN
Direct (Fixed parameter)
Item Specific Help
Setup Defaults
F9
Sub-Menu F10 Save and Exit
Description
Sets whether to enable or disable console
redirection.
Displays the serial port to be used for console
redirection.
This item appears when [Console Redirection Port]
is set to [Enabled].
Sets the connection type for console redirection.
This item appears when [Console Redirection Port]
is set to [Enabled].
• Serial
Console redirection is performed via the serial
port.
• LAN
Console redirection is performed via the LAN.
Specifies the method of connection with the
console.
This item appears when [Console Redirection Port]
is set to [Enabled].