3.7.4
Non-PnP ISA Device Configuration
This parameter reserves the use of resource addresses for non-PnP
ISA devices.
Whenever a parameter is set to "Yes", that address is reserved for an
ISA card only. The system will not allocate this address to any PCI or
PnP cards.
When set to " No" , the system will allocate these resource addresses
to PCI or PnP cards.
When installing a non-PnP ISA device, you
have to determine which resource address to
use.
information about the PCI card.
This section consists of four pages:
3-38
Refer to your manual for technical
User' s Guide