Installing A Pentium Ii Processor; Matching The Fan-Heatsink Clips With The Holes On The Processor - Acer Altos 11000 System User Manual

2.4

Installing a Pentium II Processor

You must install the heatsink and fan before
you install the processor module into the
socket on the CPU board.
The Pentium II processor module comes with holes on one side to
hold the clips of the heatsink and fan. The upper set of holes (near
the latches) on the processor are wider and should match the wider
ends of the clips on the heatsink. The lower set of holes are smaller
and should match the narrow ends of the heatsink clips.
Wide Holes
Narrow Holes
Figure 2-5 Matching the Fan-Heatsink Clips with the Holes on
the Processor
CPU Board
Wide Clip Ends
2-9