Uninstalling The Controller Management Software; Upgrading The Controller Management Software With Hp Openview; Netware Environment - HP D7171A - NetServer - LPr Installation Manual

Uninstalling the Controller Management Software

Follow these steps to uninstall the Controller Management Software
(you must be signed on as an administrator or have administrative
privileges):
1
Click the Start button on the Windows task bar, and then point
to Settings. Click Control Panel on the Settings menu.
2
Double-click the Add/Remove Programs icon.
3
Select the Hewlett-Packard HP NetRAID-
4M RAID CONTROLLER entry and then click the
Add/Remove button.
4
Follow the instructions that appear on the screen.
5
Reboot the system after uninstall is complete.
Upgrading the Controller Management Software With HP
Openview
If you installed an earlier version of the Controller Management
Software from HP Openview and are upgrading your controller to a
newer release of firmware, drivers, and Controller Management
Software, you can upgrade the Controller Management Software by
doing the following:
1
Write down the directory where Open Manage Assistant
installed the older version of the Controller Management
Software.
2
Uninstall the Controller Management Software by following
the instructions in Uninstalling the Controller Management
Software on page 5-3.
3
Using Open Manage Assistant, install the newer version of
Controller Management Software to the same directory, as
determined in step 1.
4
When the installation completes, reboot your system.

NetWare Environment

The following section explains how to install Controller
Management Software on NetWare. Note that on NetWare, the
controller can only be managed locally with the CLI. However, you
Installing the Controller Management Software
5-3