HP D7171A - NetServer - LPr Installation Manual page 41

Chapter 3
6. At the front of the NetServer, pull the NetServer forward from the rack
until you hear the lockout device engage with a click.
CAUTION The HP NetServer covers are heavy. Support them as you
remove them, and allow room to move them away from the
HP NetServer and for storage.
7. Remove Cover 1 by loosening the thumbscrew and sliding the cover
forward to disengage it. Lift it up and away from the chassis.
See Figure 3-7.
Opening and Closing the HP NetServer
Figure 3-6. Locking Latch
Locking
Latch
33